免费获取|
论文天下网
  • 论文天下网 |
  • 原创毕业论文 |
  • 论文范文 |
  • 论文下载 |
  • 计算机论文 |
  • 论文降重 |
  • 毕业论文 |
  • 外文翻译 |
  • 免费论文 |
  • 开题报告 |
  • 心得体会 |

当前位置:论文天下网 -> 论文下载 -> 毕业论文下载

交流电机型试实验及计算软件研究 二

本文ID:23494 字数:23941,页数:52

下载地址 全文下载链接(充值:¥87.00元) 

点击下载:下载地址 交流电机型试实验及计算软件研究 (收费:8700 积分)  如何获取积分?

论文字数:23941,页数:52   
 交流电机型式实验及计算机软件的研究

 摘  要:交流电机型式试验及计算机软件的研究主要包括以下几个部分:第一章,概括讲述了自动测试系统当前的发展概况和特点;第二章,说明了电机参数测试的基本原理和主要使用的测试方法,;第三章,详细讲述了交流电机型式试验的方法;第四章,详细讲述了微机在测试系统中应用的原理和结构,以及硬件的配备原则。第五章,详细介绍了自动测试系统软件的设计思路,使用流程图进行说明。这种试验系统与传统的试验方法相比,它的突出优点主要表现在:首先它缩短了试验时间,提高了试验效率,减少试验工作量;其次它的试验可靠性更高,测试的数据更精确,能自动对现场物理量进行实时采集、保存、处理与显示;再次,因为它是通过各种先进的传感器,所以能轻易获得一些不可直接测量或很难人工测量的技术参数;最后由于该系统能实时的自动生成试验报告显示并打印,因而就省去了人工记录试验结果这一过程,这也有利于工作效率的提高。
 关键词:电机 微型计算机 自动测试系统
 
  The Alternate Current Electrical Machine Experiments and the Research of the Computer Software
 
 [ABSTRACT]:Electrical Motor Automated Testing System developed with the development of PC, Logic Control Device and Intelligence Measure Instrument. With the motortechnology developing, many different type motors are applied wider and wider, suchas the Frequency Motor and Synchronal Perpetuation Magnetism motor, so higherquality motor test system is required.
     This thesis presents PC-Base Model Motor Automated Testing System whosecontrol part is consisted of PC and Programmable Logic Device (PLC): PC controlsthe test process, Intelligence measure Instrument; the PLC executes the commandssent from PC. Common Three-coil Motor, Frequency Motor, Synchronal Perpetuation Magnetism Motor can be tested by this system.
  Firstly, this thesis compares this automated system hardware structure with thoseof  some others, and analyzes the virtues and defects of these systems' hardware structures. Secondly, this thesis introduces the motor test methods according to nation motor test standard and ministry motor test standard, introduces the algorithm of automated test process, and analyzes Frequency Motor automated test to a certain extent. At the same time, this thesis introduces the design of the system software, and the way of dealing with, saving, output the measured data. At last, this thesis gives the way of improving the system, and with the combining with the foreign test system, discusses the trend of motor automated test system
  Firstly, this thesis compares this automated system hardware structure with those of some others, and analyzes the virtues and defects of these systems' hardware structures. Secondly, this thesis introduces the motor test methods according to nation motor test standard and ministry motor test standard, introduces the algorithm of automated test process, and analyzes Frequency Motor automated test to a certain extent. At the same time, this thesis introduces the design of the system software, and the way of dealing with, saving, output the measured data. At last, this thesis gives the way of improving the system, and with the combining with the foreign test system, discusses the trend of motor automated test system
Keywords: Electric machine parameter, Electrical Machine Auto Test System, personal computer user-faced

目   录
摘  要  4
Abstract 5
 第一章 绪 论 6
 第二章 测试原理 8
 2.1空载试验 8
 2.2短路试验 8
 2.3最大转矩的测量试验 8
 2.4负载试验 8
 2.5温升试验 8
 2.6 硬件原理 8
 第三章 交流电机试验方法及说明 10
 3.1绝缘电阻测量 10
 3.2直流电阻测定 10
 3.2.1试验过程 10
 3.3转子开路电压 11
  3.3.1试验过程 11
 3.4空载试验(空载电流和空载损耗) 11
  3.4.1试验内容 11
  3.4.2试验过程 11
 3.5堵转试验 9
  3.5.1试验内容 9
  3.5.2试验过程 9
 3.6温升试验 13
 3.6.1试验目的 13
  3.6.2试验分类方法   13
  3.6.3试验过程   13
 3.7效率、功率因数及转差率的测量   14
  3.7.1直接负载法 14
  3.7.2间接法 14
 3.8最大转距的测量  23
  3.8.1试验目的 23
  3.8.2试验过程 23
 3.9振动及噪声的测量   24
  3.9.1试验过程 24
 
 3.10   短时过转矩试验或过电流试验………………………………………… …  25
 3.11短时升高压试验………………………………………………………………… 25
 3.12超速试验…………………………………………………………………… …… 25
 3.13耐电压试验 ……………………………………………………………………… 25
第四章  硬件设计 26
 4.1系统的结构和基本原理 26
 4.2微型计算机在电机测试中的应用 26
 4.3电机试验用测量仪器介绍 26
 4.4部分元器件原理及设计 28
 4.4.1传感器选型及其应用 28
 4.4.2采样-保持电路 29
 4.4.3模/数转换器 30
       4.4.4数据采集系统 30
 4.5串行通信接口选型 34
 4.5.1串行通信接口标准  34
 4.5.2串行通信接口的选定   36
第五章  软件设计 39
 5.1开发环境介绍 39
 5.2开发语言 39
  5.2.1 Visual c++简介  39
 5.3软件设计方案 39
5.4程序设计 39
 5.4.1程序流程图(杂散损耗) 40
 5.4.2程序使用方法 45
 5.5界面设计 47
 5.6人机接口 52
结束语 53
参考文献 54
致  谢 55

相关论文
上一篇:交流接触器设计及其优化分析 二 下一篇:交流电动机群的运行监控系统 二
推荐论文 本专业最新论文
Tags:交流电 机型 实验 计算 软件 研究 2012-01-06 16:35:39【返回顶部】

相关栏目

教育管理论文
汉语言文学
学前教育论文
心理学论文
小学教育论文
现代教育技术
数学与应用数学
数学教育论文
工商管理
人力资源管理
财务会计
法律论文
行政管理论文
物流专业论文
电子商务论文
理工科论文
物理学论文
乡镇企业管理
电视制片管理
文化产业管理
物业管理论文
毕业论文下载
包装工程论文
印刷工程论文
工业工程论文
信息管理论文
生物工程论文
制药工程论文
电子信息工程
通信工程论文
电气工程论文
信息计算科学
药学专业毕业论文


关于我们 | 联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 原创毕业论文

 

论文天下网提供论文检测,论文降重,论文范文,论文排版,网站永久域名WWW.GEPUW.NET

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 893628136@qq.com

Copyright@ 2009-2022 GEPUW.NET 论文天下网 版权所有