免费获取|
论文天下网
  • 论文天下网 |
  • 原创毕业论文 |
  • 论文范文 |
  • 论文下载 |
  • 计算机论文 |
  • 论文降重 |
  • 毕业论文 |
  • 外文翻译 |
  • 免费论文 |
  • 开题报告 |
  • 心得体会 |

当前位置:论文天下网 -> 论文下载 -> 电子信息工程

基于单片机的数控直流稳压源设计

本文ID:20081 字数:11823,页数:44

下载地址 全文下载链接(充值:¥118.00元) 

点击下载:下载地址 基于单片机的数控直流稳压源设计 (收费:11800 积分)  如何获取积分?

论文编号:DZXX385 论文字数:11823,页数:44

摘要


 单片机由于体积小,功能齐全、可靠性高,越来越受到人们的关注. 基于单片机的电路往往比传统的电路设计具有更大的灵活性。
 随着时代的发展,单片机技术已经普及到我们生活,工作,科研的各个领域.由于人们生活水平的提高,传统的电压源已经不能满足人们的需求.本文将介绍一种数控直流稳压电源,同时分析了数字技术和模拟技术相互转换的概念。
  本系统以直流电流源为基础,89S52单片机为主控制器,通过键盘来设置直流电源的输出电压,设置步进等级可达0.1V,并可由LCD显示电压设定值。本系统由单片机控制设定数字信号,经过D/A转换器(DAC0832)的输出模拟量,再经过运算放大器放大,最后通过可调稳压器LM338输出电压。此设计用到了数字技术中的单片机,D/A 转换器,LCD显示等电路,具有控制精度高,制作比较容易等优点。
 
关键词:数控; 数模转换; 89S52

Abstract

 MCU because of physical volume small, the function is well-found, the credibility is high, is subjected to the concern by people more and more . The mcu-based circuit than traditional circuit design with greater flexibility.
 With the development of the times, MCU technology has spread to our lives, work, and research in all fields. Along with the life horizontal exaltation, people pursue humanized thing more and more, the traditional power supple has already can't satisfied people's demand .this paper will introduce a digital DC voltage power supply, and analyse the digital technology and simulation technology mutual conversion concept.
  This system take the DC current source for the base ,89S52 for mainly controller, through keyboard to establish the  direct current power supply’s output voltage, install stepping up to 0.1V levels, and the LCD shows the  output voltage and the actual output current. This system programmed by MCU to set digital signals, after D/A converters (DAC0832),  the simulation export volume is sent to the  amplifier. Then through the adjustable voltage regulator LM338 output voltage. The design use the digital technology in MCU, D/A converters, LCD display, and other circuits, It has advantages such as high-precision control and product easily.
Keywords : digital; D/A conversion;89S52

 

课题的目标
实现电压0-12V内电压可调;
输出精度高,步进电压在0.1V左右,并且调整方便;
输出最大电流:0.5A以上;
对电流进行监控;


目录
摘要 1
Abstract 2
第1章  绪论 5
1.1课题背景及重要意义 5
1.2课题设计的目的及目标 6
1.2.1课题的目的 6
1.2.2课题的目标 7
第2章 设计方案论证 8
2.1  通过改变交流线圈杂数的实现方案 8
2.2编码和存储器相结合的实现方案 9
2.3  MCU和DAC相结合的实现方案 10
第3章 系统硬件设计 12
3.1 电源设计 12
3.2 CPU及外围电路设计 13
3.2.1 AT89S52引脚结构 13
3.2.2时钟电路 17
3.2.3复位电路: 18
3.3数模转换及电压输出设计 20
3.4电流测量设计 22
3.5显示电路设计 24
3.6按键设计 25
3.7 设计软件Protel 99SE简介 26
3.7.1 Protel 99SE的特性简介 26
3.7.2 Protel 99SE原理图设计 27
3.7.3 Protel 99SE PCB设计 28
第4章 系统软件设计 31
4.1 软件总体流程图 31
4.2键盘扫描子程序 32
4.3解码和显示子程序 37
第5章  系统调试 39
5.1软件调试 39
5.2硬件调试 39
第6章 系统设计总结 41
致谢 42
参考文献 43
附录: 英文原文及翻译 44
高 效 可 编 程 电 源 56

相关论文
上一篇:铅酸蓄电池的充电器及放电保护器.. 下一篇:纠突发错误译码器的设计
推荐论文 本专业最新论文
Tags:单片机 数控直流稳压源 直流稳压源设计 2011-06-05 10:59:49【返回顶部】

相关栏目

教育管理论文
汉语言文学
学前教育论文
心理学论文
小学教育论文
现代教育技术
数学与应用数学
数学教育论文
工商管理
人力资源管理
财务会计
法律论文
行政管理论文
物流专业论文
电子商务论文
理工科论文
物理学论文
乡镇企业管理
电视制片管理
文化产业管理
物业管理论文
毕业论文下载
包装工程论文
印刷工程论文
工业工程论文
信息管理论文
生物工程论文
制药工程论文
电子信息工程
通信工程论文
电气工程论文
信息计算科学
药学专业毕业论文


关于我们 | 联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 原创毕业论文

 

论文天下网提供论文检测,论文降重,论文范文,论文排版,网站永久域名WWW.GEPUW.NET

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 893628136@qq.com

Copyright@ 2009-2022 GEPUW.NET 论文天下网 版权所有