年产8万吨涂布白板纸制浆造纸综合工厂设计

论文编号:QH007  论文字数:16008,页数:34  附CAD图

年产8万吨涂布白板纸制浆造纸综合工厂设计
重点：日产240吨涂布白板纸干燥部、涂布及完成整理部工艺设计
摘  要
 本设计的题目为年生产8万吨涂布白纸板制浆造纸综合工厂，重点为日产240吨涂布白板纸干燥部、涂布及完成整理部工艺设计。本设计以废纸为主要原料，经过碎解、脱墨等工序抄造涂布白纸板。造纸设备采用日产240吨的四叠网纸机，设计内容包括浆水平衡计算图绘制、设备选型及计算、车间设备平面布置图、工艺流程图绘制。人员的技能条件要求，原料的分类管理，运输管理设计，厂区绿化布局，给水排水规划，污染物的净化和排放，环境保护和综合利用。
关键词：制浆造纸，涂布白纸板，造纸车间，干燥
 

 Annual 8ten thousand of coating whitepaperboard pulp integrated plant design
 Key: 240 t/d of coating, coating, dry white paper and arrangement of process design
 
ABSTRACT： The design of the topic for produced 80,000 tons of coated paper pulp and paper board, comprehensive factory for 240 t/d of coating whitepaperboard dry, coating and arrangement of process design. This design to waste as main raw materials, after pulp, etc ChaoZao deinking coated paper board. Paper-making equipment adopts 240 t/d of paper pulp, design includes water balance calculation drawing and equipment selection and calculation, workshop equipment layout, process flow diagram. Conditions require the skills of personnel, the classification of raw materials management, transportation management and design, green plant layout, water supply and drainage planning, decontamination and disposal of pollutants, environmental protection and comprehensive utilization.

Keywords: Pulp and papermaking, coated paper board, workshop, dry

目 录
摘要…………………………………………………………………………………I
ABSTRACT……………………………………………………………………………II
目 录 ……………………………………………………………………………  III
1 工程设计背景与发展状况………………………………………………………1
 1.1 工程设计的背景……………………………………………………………1
 1.2 工程设计的必要性…………………………………………………………4
 1.3 工程设计的发展状况………………………………………………………5
 1.4 需求预测与设计规模………………………………………………………6
2 工程设计条件与总平面布置……………………………………………………6
 2.1工程设计条件……………………………………………………………… 6
 2.2 总平面布置…………………………………………………………………7
3 生产工艺设计……………………………………………………………………10
 3.1 全厂生产车间组成…………………………………………………………10
 3.2 车间生产综合叙述…………………………………………………………10
 3.3 车间技术经济指标和工艺参数……………………………………………11
 3.4 浆水平衡计算………………………………………………………………13
 3.5 设备选型说明………………………………………………………………17
 3.6 生产车间的布置说明………………………………………………………17
4 车间公用工程……………………………………………………………………17
4.1 厂房建筑与结构………………………………………………………………17
 4.2 给水与排水…………………………………………………………………18
 4.3 动力…………………………………………………………………………19
 4.4 自控与仪表…………………………………………………………………20
 4.5 环境保护与综合利用……………………………………………………  20
 4.6 劳动安全卫生………………………………………………………………21
5 工程经济分析……………………………………………………………………23
6 结论………………………………………………………………………………25
致谢…………………………………………………………………………………27
参考文献……………………………………………………………………………28