自动太阳光追踪器

论文编号:JD740  论文字数:7934,页数:35

摘  要
本文介绍了自动太阳光追踪器的设计，它是一种用于对太阳光进行自动追踪的装置。主要分为光敏传感模块、数码管显示模块、A/D转换模块、按键控制模块、单片机系统控制模块。通过对步进电机组A与B的转动来控制暗箱的方位，从而确定太阳所在的位置。它比传统的测试仪更加方便实用，具有广泛的应用前景。通过此次设计，能够加深掌握以单片机为控制,数据采集、处理的设计方法,以及电路设计的知识。

关键词：AT89S52单片机，A/D转换，达林顿管，光敏传感器，步进电机

Abstract
In this paper, the design of the Automatic Sun Traces is introduced. This instrument is used to track the sunlight; and it consists of Photosensitive Sensor module, digital control module, A/D conversion module, button control module, SCM control module. Through the stepper motor group A and B of the rotation to control the position of the dark, to determine the location of the sun. The instrument I have designed is significantly more convenient than the traditional ones; hence potentially it can be much more widely used in future.
Furthermore, during the design, we have gotten more familiar with knowledge in the fields of digital control based on SCM, data acquisition and processing, as well as circuit design.

Key words：AT89S52，monolithic，integrated circuit，A/D transformation，Darington tube，Photosensitive sensor，Step-by-steps the electrical machinery

目 录
摘  要 I
Abstract II
1 引言 1
2 方案设计与论证 1
2.1 微处理器选择方案 1
2.2 LED显示模块 1
2.3 按键模块 2
2.4 采光模块 2
3 系统硬件电路设计 4
3.1 单片机系统模块 4
3.1.1 AT89S52的管脚图及功能简介 5
3.1.2 单片机的外围电路 6
3.2 传感器输入模块 7
3.2.1 传感器的安装设置 7
3.2.2 传感模块电路的器件功能简介 7
3.3  A/D转换模块 8
3.3.1 A/D转换芯片ADC0809简介 8
3.3.2 A/D转换模块电路设计 10
3.4 人机交互模块 11
4 系统软件流程 12
4.1 系统程序总流程图 12
4.2 数据采集程序流程图 13
4.3 电机驱动及方位调整流程图 13
4.4 显示部分程序流程图 14
5 系统特点 15
6 结语 15
7 参考文献 16
附录一：系统硬件图 17
附录二：系统主要软件 18