In the competitive era of economic globalization and increasingly markets, the development time for new product become a key factor to win in the fierce competition market. The traditional product design process of double counting, such as repeated heavy workload and modeling have troubled the product development staff, a serious impact on product design quality and efficienct. This phenomenon is particularly on the design of cam highlights. Address with this problem, the subject of using the movement simulation module of Pro / E software on the cam movement simulation.
In this paper, the main research contents are as follows:
1. Designing the groove cam
2. Modeling the mechanism parts of groove cam
3. Motion simulating of the groove cam mechanism Key Words: Cam groove, Modeling, Motion Simulation
目 录
绪 论 1
1.1 本文研究的背景 1
1.1.1 我国凸轮机构的研究现状 1
1.1.2 我国凸轮机构CAD/CAM的研究现状 1
1.1.3 国外凸轮机构及其 CAD/CAM的研究现状 2
1.1.4 我国凸轮CAD系统存在的问题 2
1.2 本文研究的主要内容 2
1.3 本文意义 3
1.4 本章小结 3
2 凸轮机构设计分析 4
2.1 从动件运动规律的选取 4
2.1.1 从动件常用的基本运动规律 4
2.1.2 从动件运动规律的选取原则 4
2.2 凸轮机构基本尺寸的设计 5
2.2.1 凸轮机构压力角和基圆半径 5
2.2.2 凸轮机构的偏距 6
2.2.3 凸轮滚子半径 6
2.3 凸轮轮廓设计 7
2.4 机构简介 8
2.5 本章小结 9
3 凸轮机构的实体建模与装配 10
3.1 Pro/E软件简介 10
3.2 零部件的实体建模 10
3.3 装配原理简介与装配模型的建立 12
3.3.1 Pro/E仿真装配原理介绍 12
3.3.2 装配模型建立 14
3.4 本章小结 17
4 凸轮机构的运动仿真 18
4.1 计算机仿真概述 18
4.1.1 计算机仿真的基本概念及特点 18
4.1.2 计算机仿真技术在制造业中的应用 18
4.2 Pro/E运动仿真简介 19
4.2.1 Pro/E运动仿真的特点 19
4.2.2 Pro/E运动仿真的基本术语 20
4.2.3 Pro/E运动仿真的步骤 21
4.3 凸轮机构的运动仿真 21
4.3.1 设置机构环境 21
4.3.2 分析 25
4.4 本章小结 29
结 论 30
致 谢 31
参考文献 32