大流量柱塞泵设计

论文编号:JX274 所有图纸,外文翻译。论文字数:36680.页数:111

摘   要

     柱塞式往复泵的突出优点是:可获得高的排压,且流量与压力无关,适应输送介质十分广泛,吸入性能好,效率高,泵的性能不随压力和输送介质粘度的变动而变动.在当今世界能源紧缺的形势下,往复泵作为节能产品,在石油开发、管道输煤、煤气化工、电站排渣、矿山开采等方面起着重要作用,而且在压力容器检测和实现现代化石油化工工业全面自动化方面也是不可缺少的品种.近年来,其产量明显增长,证实了它在国民经济发展中的地位.
柱塞泵主要用于国内上有关的国民经济部门,该技术在我国的煤炭工业上也发挥其重要作用.
本说明书从以下几个方面介绍了五柱塞泵的设计.
本泵设计时尽可能考虑实现“条例化、通用化、标准化”以利加工、制造、使用和维修.首先搞清楚柱塞泵的分类及其发展历史再说明了柱塞泵的工作原理.
然后选择了电机、减速器等部件,最主要的是五曲轴及连杆液缸体等主要零部件的设计计算,最后是销、阀、箱体等的选择以及泵的保养、维修、安全使用等等.
   
关键词:柱塞泵 ；五柱塞 ；煤炭 ；分类

ABSTRACT

Reciprocating pump the plunger prominent advantages are: the row will be high pressure, and the flow has nothing to do with the pressure to adapt to a wide range transmission medium, inhalation good performance, high efficiency, not with the performance of pump pressure and transmission medium viscosity change in the movement . In today's world energy shortage situation,reciprocating pump as energy-saving products, in the development of oil, coal handling pipes, gas chemical industry, power plants slag discharge, such as mining plays an important role, and pressure vessels in the detection and modernization Petrochemical Comprehensive industrial automation is also indispensable varieties. In recent years, significant growth in its production, confirmed in the position of national economic development.
Piston pump used on the domestic economic sector, the technology in China's coal industry has also played an important role.
The statement from the following areas on a five-piston pump design.
The pump designed to achieve as much as possible to consider "the, universal, standardized" to facilitate the processing, manufacture, use and maintenance. Piston pump first make clear the historical development of the Classification and again that the principle of the piston pump.
Then select the motor, reducer, and other components, most notably the five-cylinder crankshaft and connecting rod, and other major parts of the design basis, the sale is final, valves, tank and pump, and so the choice of the maintenance, repair, security, use And so on.

Keyword:
    Piston pump ；five plunger ；coal ；Category

目    录

一概述 ..................................................................1
1.1往复泵的发展概况 ......................................................1
1.2往复泵的原理及特点  ...................................................1
1.2.1往复泵的原理........................................................ 2
1.2.2往复泵的特点 ........................................................2
1.3往复泵的分类.......................................................... 4
1.4往复泵的应用与发展.................................................... 6
二方案论证 ..............................................................9
2.1大流量柱塞泵.......................................................... 9
2.1.1柱塞泵的基本原理.................................................... 9
2.1.2柱塞泵的分类 ........................................................10
2.1.3方案确定 ............................................................18
三主要参数的设计........................................................ 22
3.1泵内主要参数的计算 ....................................................22
3.2原动机的选择.......................................................... 23
3.3运动与动力参数计算.................................................... 24
四齿轮传动设计.......................................................... 26
4.1齿轮的设计...................................................... ......26
4.1.1按照齿面接触疲劳强度计算 ............................................26
4.1.2齿轮的基本几何参数.................................................. 32
4.2齿轮轴的结构设计及强度计算 ............................................33
4.2.1齿轮轴的结构设计.................................................... 34
4.2.2齿轮轴的强度校核 ....................................................35
4.2.3齿轮轴轴承寿命计算.................................................. 40
五传动端结构设计 ........................................................41
5.1曲轴连杆机构的运动分析 ................................................41
5.2曲轴的结构设计........................................................ 42
5.2.1主要尺寸的初步确定.................................................. 45
5.2.2曲轴的静强度校核.................................................... 47
5.3主轴承寿命计算 ........................................................67
5.4连杆的结构设计........................................................ 68
5.4.1确定连杆的主要尺寸 ..................................................69
5.4.2连杆的强度及稳定性校核 ..............................................74
5.4.3连杆大头轴瓦的计算.................................................. 82
5.5十字头的结构设计...................................................... 84
5.5.1确定十头字主要尺寸.................................................. 85
5.5.2十字头强度校核 ......................................................86
六液力端结构设计........................................................ 89
6.1液缸体的设计计算...................................................... 89
6.2柱塞的结构尺寸 ........................................................89
6.3泵阀(吸、排液阀)的设计计算............................................ 90
七机体的结构设计........................................................ 94
7.1机体主要尺寸的确定.................................................... 95
结论 .....................................................................97
参考文献................................................................. 98
翻译部分................................................................ .100
英文原文 .................................................................100
中文译文................................................................ .107
致谢......................................................................111