杭州华方数控机床有限公司综合楼

论文编号:TM050   论文字数:10167,页数:77  附CAD图

摘要
 本设计主要进行了结构方案中横向框架6轴框架的抗震设计。在确定框架布局之后，先进行了层间荷载代表值的计算,进而计算竖向荷载（恒载及活荷载）作用下的结构内力，接着求出在水平荷载（风荷载）作用下的结构内力（弯矩、剪力、轴力）。 是找出最不利的一组或几组内力组合。 选取最安全的结果计算配筋并绘图。此外还进行了结构方案中的室内楼梯的设计。完成了平台板，梯段板，平台梁等构件的内力和配筋计算及施工图绘制。
关键词： 框架    结构设计    抗震设计  
 

 Abstract
    The purpose of the design is to do the anti-seismic design in the longitudinal frames of axis 2. When the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment, shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead and live loads, the combination of internal force can be made by using the Excel software, whose purpose is to find one or several sets of the most adverse internal force of the wall limbs and the coterminous girders, which will be the basis of protracting the reinforcing drawings of the components. The design of the stairs is also be approached by calculating the internal force and reinforcing such components as landing slab, step board and landing girder whose shop drawings are completed in the end.

目  录
一、工程概况 …………………………………………………………………………5
二、结构布置及计算简图确定 ………………………………………………………6
三、荷载计算       …………………………………………………………………8
四、内力分析      …………………………………………………………………14
五、内力组合      …………………………………………………………………42
六、截面设计…………………………………………………………………………42
七、板的设计…………………………………………………………………………53
八、楼梯设计…………………………………………………………………………57
九、基础设计  ………………………………………………………………………61
致谢      ……………………………………………………………………………80 
参考文献      ………………………………………………………………………81
附表：梁柱内力组合表